News

Remote control system - Expert Remote, utilizes a client - server connection. PC with the installed ExpertRemoteServer (ExpertRS) (for MB1 users, ExpertRS should be installed on the MB1) connected

to any Expert Electronics device (one or several) used as a server.

Server’s PC connected to a router with an access to the Internet.

PC with the installed ExpertRemoteClient (ExpertRC) used as a client. Also you may use WEB-browser (HTML5) on your PC/tablet/mobile.

 

ExpertRS server - software receives a high-speed stream of quadrature channels from the receiver(s), processes the signals, calculates spectrum for panorama, demodulates received signal in the RX bandwidth and sends it via local network and/or Internet to the ExpertRC client - software. Before sending the received signal, it is compressed by the server-software. Data traffic of the received signal equals 30 - 50 Kbit/s. Panorama data is also being compressed and sent to the client-software along with the received signal. Panorama data traffic equals to 30 - 950 Kbit/s. Data transfer protocol of the remote control system also includes receiver's control commands for all parameters (change frequency, modulation types, control of DSP functions, compression quality, etc.). Total Internet traffic equals 60...1000 Kbit/s and depends on the level of the signal compression and panorama quality in the client-software window